Bandsaw BEWO HCH-40




MODEL: HCH-40



PRODUCT CHARACTERISTICS

The BEWO HCH-40 can be supplied on the basis of either an ECH line, and a DCH line, is the chip-free alternative for small diameters.

Either as a single or double chop line. In the first case as a single chop line, in the second case as a double chop line. The chop unit has been developed for diameters between 10 and 40 mm.

The BEWO HCH-40 can be supplied on the basis of either an ECH-line, and a DCH-line.

Uninterrupted Chopping Process

A servo-controlled drive system ensures a continuous supply of round pipe, in both steel and aluminum.

Because the tubes are guided automatically at several places while being transported, this brings about an uninterrupted chopping process.

The punch molds have been installed in a cassette system, which makes it possible to switch tube diameters quickly.

The uniquely shaped chopping blade limits any distortion of the tubes to a minimum and need not be changed when switching to another material.
 

 

ACCESSORIES

BEWO measuring system SCC-90

BEWO measuring system BMS-90

TECHNICAL DATA

MODELLO HCH 40
Motor -
Cutting speed (m/min.) -
Capacity fino a 2.800 products/h
Precision 0,2 mm: length tolerance
Min. pipe diam. 10mm
Max. pipe diam. 40 mm
Min. square or rectangular -
Max. square or rectangular -
Min. product lenght 30 mm
Max. product lenght 3000 mm (on request other lenght)
Max. weight 120 kg

Frascio S.r.l.
Via G. Prati, 82 25086 Rezzato (BS) Italy
C.F. - P.IVA 03433290172
ISCRIZIONE REA: BS-397135 DEL 13.01.1998
CAPITALE SOCIALE € 10.920,00
Indirizzo PEC frasciosrl@legalmail.it

Tel.: +39 030 2792257 - +39 030 2793095
Fax: +39 030 2590368 - +39 030 2595483
Mail: info@riccardofrascio.com