Bandsaw Cosen C-1000 NC




MODEL: C-1000 NC



PRODUCT CHARACTERISTICS
STRUCTURE
Oversized precision ground, large dual columns;Cross link connecting two columns for enhanced structural strength;0.5 degree cant to the bed for longer blade life;

BLADE DRIVE
Specially designed gearbox for high lateral pressure;Inverter controlled infinitely variable blade speed

BLADE GUIDANCE & LUBRICATION SYSTEM
Hydraulicallt activated carbide blade guides with bearing guides;Two addtional guides to support the blade from the top;Hydraulically actuated guide arm;Automatic hydraulic blade tensioning device;Integral coolant system;Pitch design for coolant drainage;Independent power driven wire brush system;

CONTROL & AUTOMATION
Smart NC-100 PLC technology;Programmable up to 100 individual cutting jobs  with HMI touch screen;Automatic kerf loss compensation;Automatic shutoff after cutting jobs complete or when out of stock;Precision feed pressure & feed rate dual valve system;Bundle/single cutting mode switch;
Rapid troubleshooting via error feedback system;Automatic work height selector & air gap eliminator;
Ergonomically located independent control station;

MATERIAL FEEDING & CLAMPING
Vises located on opposite sides of the blade;Full stroke hydraulic front and rear vises;Double retracting vise jaws;Automatic multiple indexing up to 6500 mm (650");Heavy-duty ductile cast iron vises with replaceable hardend wear plates;Roller workbed for smooth material feeding;

SAFETY
Idle wheel motion proximity switch for sensing blade slippage or breakage;Interlock design in electrical and hydraulic system;Conduits protection measure;"Alert Orange" safety measure;

STANDARD ACCESORIES
Blade "clip" device for easy blade change;Additional flushing hose;Bi-metal saw blade;Beam light;Tool box, leveling pads, and an additional wire brush;Operation & parts manual.

ACCESSORIES

Vertical hydraulic shuttle vise assembly.

Shuttle vise pressure regulator.

TECHNICAL DATA

C-1000 NC
Capacità di taglio
1000 mm 1000x1000 mm
Velocità lama (m/min.) 250 - 470 mm
Dimensioni lama (mm) 9400 x 67 x 1.6
Placchette in metallo duro con serraggio idraulico
Tensione lama Idraulica
Potenza motore lama 15 HP (11.25 Kw)
Potenza motore idraulico 3 HP (2.2 Kw)
Potenza motore emulsionabile 1/4 HP (0.19 Kw)
Avanzamenti singolo: 500mm - multiplo max. 6500mm
Olio idraulico 100 L
Liquido emulsionabile 120 L
Non alimentabile 400 mm
Compensazione lama Automatica
Controllo morse Idraulica
Piano di lavoro 630 mm
Peso 11000 kg
Ingombri 2050 x 4400 x 3500 mm

Frascio S.r.l.
Via G. Prati, 82 25086 Rezzato (BS) Italy
C.F. - P.IVA 03433290172
ISCRIZIONE REA: BS-397135 DEL 13.01.1998
CAPITALE SOCIALE € 10.920,00
Indirizzo PEC frasciosrl@legalmail.it

Tel.: +39 030 2792257 - +39 030 2793095
Fax: +39 030 2590368 - +39 030 2595483
Mail: info@riccardofrascio.com