Bandsaw Cosen C-520NC



STRUCTURE:Oversized precision ground, large dual columns; Cross link connecting two columns for enhanced structural strength; Back-tilted saw frame for longer blade life; Hydraulic shuttle vise assembly.

BLADE DRIVE: Specially designed gearbox for high lateral pressure; Inverter controlled infinitely variable blade speed.

BLADE GUIDANCE & LUBRICATION SYSTEM: Hydraulic carbide blade guides with bearing guides; Two additional guides to support the blade from the top; Automatic hydraulic blade tensioning device; Integral coolant systeM; Pitch design for coolant drainage; Synchronized power driven blade brush.

CONTROL & AUTOMATION: Smart NC-100 (SNC-100) technology programmable up to 100 different jobs; Automatic kerf compensation & automatic multiple indexing;"Save-a-Blade" design to prevent tooth deformities; Automatic shutdown; Error code display for simplified self-diagnostics; LCD screen with film type key pad, blade speed/life, feed vise position display;Precision feed pressure & feed rate dual valve system; Bundle/single cutting mode switch; Automatic work height selector & air gap eliminator

MATERIAL FEEDING & CLAMPING: Split vise jaws featuring automatic feeding down to remnant length of 90mm (3.5"); Double retracting vise jaws; Full stroke hydraulic front and rear vises; Ductile cast iron vises with replaceable hardened wear plates; Smart NC controlled multiple indexing; Multiple horizontal rollers to facilitate smooth material feeding; Discharge table with built-in coolant return; One set of vertical alignment rollers.

SAFETY: Proximity switch for sensing blade slippage or breakage; Interlock design in electrical and hydraulic system; Conduits protection measure; "Alert Orange" safety measure.

STANDARD ACCESSORIES: Blade "clip" device for easy blade change; Adjustable fence to support bundled cut-off stock; Additional flushing hose; Bi-metal saw blade; Built in work light; Tool box, leveling pads, and an additional wire brush; Operation & parts manual.


Vertical hydraulic shuttle vise assembly.

Shuttle vise pressure regulator.


C-520 NC
Capacità di taglio
520 mm 520 mm 560x520 mm
Capacità di taglio a fasci - larghezza 250 - 470 mm
Capacità di taglio a fascio - altezza 150 - 315 mm
Velocità lama (m/min.) 20 - 100 m/min.
Dimensioni lama (mm) 6040 x 54 x 1.6
Tensione lama Idraulica
Potenza motore lama 7,5 HP (5.6 Kw)
Potenza motore olio 2 HP (1.5 Kw)
Potenza motore emulsionabile 1/4 HP (0.19 Kw)
Olio idraulico 40 L
Liquido emulsionabile 80 L
Corsa carro Singola 503 mm
Multipla max. 6500 mm
Pezzo finale 60 mm
Morse Hydraulic
Piano di lavoro 690 mm
Peso 3700/4300 kg
Ingombri (mm) 2400 x 2677 mm

Frascio S.r.l.
Via G. Prati, 82 25086 Rezzato (BS) Italy
C.F. - P.IVA 03433290172
ISCRIZIONE REA: BS-397135 DEL 13.01.1998
Indirizzo PEC

Tel.: +39 030 2792257 - +39 030 2793095
Fax: +39 030 2590368 - +39 030 2595483