Bandsaw Cosen C-800 NC



STRUCTURE: Oversized precision ground, large dual columns; Cross link connecting two columns for enhanced structural strength; 0.5 degree cant to the bed for longer blade life.

BLADE DRIVE: Specially designed gearbox for high lateral pressure; Inverter controlled infinitely variable blade speed.

BLADE GUIDANCE & LUBRICATION SYSTEM: Hydraulicallt activated carbide blade guides with bearing guides; Two addtional guides to support the blade from the top; Hydraulically actuated guide arm; Automatic hydraulic blade tensioning device; Integral coolant system; Pitch design for coolant drainage; Synchronized power driven blade brush.

CONTROL & AUTOMATION: Front mounted digital length counter; LED digital blade speed monitor; SNC-100 PLC control; Automatic shutoff sensor for out of stock; Precision feed pressure & feed rate dual valve system; Bundle/single cutting mode switch; Automatic work height selector & air gap eliminator.

MATERIAL FEEDING & CLAMPING: Vises located on opposite sides of the blade; Full stroke hydraulic front and rear vises; Double retracting vise jaws; Multiple indexing up to 650"; Ductile cast iron vise with replaceable hardend wear plates.

SAFETY: Idle wheel motion proximity switch for sensing blade slippage or breakage; Interlock design in electrical and hydraulic system; Conduits protection measure; "Alert Orange" safety measure.

STANDARD ACCESSORIES: Blade "clip" device for easy blade change; Adjustable front plate for cut-off stock; Additional flushing hose; Bi-metal saw blade; Built in work light; Tool box, leveling pads, and an additional wire brush; Operation & parts manual.


Vertical hydraulic shuttle vise assembly.

Shuttle vise pressure regulator.


C-7656 NC
560 mm 560 mm 760x560 mm
Bundle capacity - Width 250 - 500 mm
Bundle capacity - Height 265 - 400 mm
Blade speed (m/min.) 20 - 100 m/min.
Blade dimensions (mm) 6665 x 54 x 1.6
Tension Hydraulic
Motor output - saw blade 10 HP (7.5 Kw)
Motor output - hydraulic 2 HP (1.5 Kw)
Motor output - coolant 1/4 HP (0.19 Kw)
Hydraulic tank 40 L
Coolant tank 85 L
Automatic Indexing Length Singola 503 mm
Multipla max. 9999 mm
Pezzo finale 200 mm
Vise control Hydraulic
Height of Work Bed 680 mm
Weight 5400 kg
Floor space (mm) 2330 x 3890 mm

Frascio S.r.l.
Via G. Prati, 82 25086 Rezzato (BS) Italy
C.F. - P.IVA 03433290172
ISCRIZIONE REA: BS-397135 DEL 13.01.1998
Indirizzo PEC

Tel.: +39 030 2792257 - +39 030 2793095
Fax: +39 030 2590368 - +39 030 2595483